DynaLAL

DYNALAL - PRESSURE REDISTRIBUTION SURFACES - LOW AIR LOSS
  • "TRUE" LOW AIR LOSS TECHNOLOGY

    Air escapes from 72 laser-cut openings and distributes equally under a vapour-permeable, quilted cover that acts to wick moisture away from the individual.

    DEEP CELL ALTERNATION THERAPY

    18 independent 8 inch high cells gently inflate and deflate in a 3:1 cycle.

    EXTERNAL EXHAUST HOSE

    This design channels heat away from the interior of the DynaLAL, promoting a bacteria-free environment as well as ensuring a cool and comfortable climate.

    SIMPLE, MODULAR CELL CONSTRUCTION

    Replacement of individual cells and components is quick, easy, and cost effective. Cells are attached externally with snaps for easy disinfecting.

    VAPOUR-PERMEABLE COVERS

    Each surface comes with two fully-quilted zip covers. They wick moisture away from the body and prevent shearing and friction. All covers are machine washable, antimicrobial, fluid resistant and flame retardant.

    ADJUSTABLE SECURITY TIES

    Eight ties secure the system to any standard hospital bed frame.

    CPR QUICK-RELEASE VALVE

    This feature deflates the torso section in less than 20 seconds for medical emergencies.

    2" CONVOLUTED FOAM BASE

    This provides added patient protection in event of power failure. The foam is enclosed in a moisture proof material that protects against bacteria build up.

  • DynaLAL Control Unit

    STATIC MODE 

    For individuals unable to tolerate a moving surface, the "static" mode provides constant low-pressure for comfortable pressure relief.

    ALTERNATION MODE 

    Cycle times can be set from 5-95 min. to best meet the treatment needs of each individual. Cells alternate in a 3:1 ratio so that the individual is always supported by 2/3 of the cells.

    AUTO-FIRM MODE 

    This feature provides, within seconds, a stable surface for patient transfers and nursing procedures (returns to alternation mode after 30 min. if auto-firm is not deactivated).

    SOFT/FIRM 

    Eight soft/firm settings are available for easy comfort adjustment. This allows the caregiver to fine tune therapeutic support and optimize comfort.

    AUTO ALARM 

    This will alert the caregiver in the event of a power failure. 

  • Mattress

    Weight Capacity Up to 1000 lbs
    Inflated Dimension 36" x 80" x 9.5" (standard) *other widths and lengths available
    Weight 33 lbs (standard)
    Air Cell Material
    Polyurethane
    Cover Material Quilted fabric with polyurethane coating
    Base Material
    Woven Polyester fabric with PVC backing
    Safety Standard Meets open flame requirements(FCC 16CFR 1633)

    Control Unit

    Inflation Time Under 1 minute
    Functions Alternation Cycle (5 - 95 min) 8 comfort levels; Auto Firm; Static Mode; Lock-out Capability; Auto-Memory Reset; Low Air Loss; CPR Valve
    Power requirement 100~240 volt, 50/60Hz, 5 Amp
    Size 16.5"(L) x 6.7"(W) x 10.6"(H)
    Weight 13.2 lbs
    Max. Air-flow 1200 lpm
    Safety Standard UL/cUL