Turning System

TURNING SYSTEM - PRESSURE REDISTRIBUTION SURFACES - LOW AIR LOSS
  •   Turning System Sell Sheet

     Turning System User Manual

    The Turning System from Quart Healthcare is a low air loss mattress replacement system with lateral rotation therapy. It combines the most advanced technology and clinically effective features for the prevention and treatment of pressure ulcers.

  • ROTATION ANGLE

    Can be independently selected for 20-degrees or 40-degrees.

    ROTATION TIME

    Can be adjusted from 5 min. to 95 min. or the caregiver can select the Static Function which will stop the Rotation Function and provide true low air loss therapy for comfortable pressure relief.

    INDIVIDUAL AIR CUSHION DESIGN FOR MAXIMUM PRESSURE DISTRIBUTION.

    PERMANENTLY INFLATED LATERAL SIDE BOLSTERS FOR ADDED SAFETY. SIMPLE, MODULAR CELL CONSTRUCTION

    Replacement of individual cells and components is quick, easy, and cost effective. Cells are attached externally with snaps for easy disinfecting.

    2" CONVOLUTED FOAM BASE

    This provides added patient protection in event of power failure. The foam is enclosed in a moisture proof material that protects against bacteria build up.

    "TRUE" LOW AIR LOSS TECHNOLOGY

    Air escapes at a high flow rate from 72 laser- cut openings and distributes equally under a vapour-permeable, quilted cover that acts to wick moisture away from the patient.

    VAPOUR-PERMEABLE CONTOURED TOP COVER

    Facilitates patient centering and leg abduction. Each surface comes with two fully-quilted zip covers. They wick moisture away from the body and prevent shearing and friction. All covers are machine washable, antimicrobial, fluid resistant and flame retardant.

    ADJUSTABLE SECURITY TIES

    Eight ties secure the system to any standard hospital bed frame.

    AUTO-FIRM MODE

    This feature provides, within seconds, a stable surface for patient transfers and nursing procedures (returns to original settings after 30 min. if auto-firm is not deactivated).

    SOFT/FIRM

    Eight soft/firm settings are available for easy comfort adjustment. This allows the caregiver to fine tune therapeutic support and optimize patient comfort.

  • Elite turn Control Unit

    MASTER CONTROL UNIT

    Double insulation for whisper quiet operation. Light weight and durable with adjustable brackets that hang at the head or foot of bed, allowing for easy clinician or patient oriented control.

    ENCLOSED CABLE MANAGEMENT

    This feature prevents tangled and trailing air hoses.

    EASY-ACCESS FILTER

    Cleaning is simple because the filter is readily accessible.

    AUTO ALARM

    This will alert the caregiver in the event of a power failure

  • Mattress

     
    Weight Capacity Up to 1000 lbs
    Inflated Dimension 36" x 80" x 9.5"
    Weight 33 lbs (standard)
    Air Cell Material Nylon
    Cover Material Quilted fabric with polyurethane coating
    Base Material Woven Polyester fabric with PVC backing
    Safety Standard Meets open flame requirements (FCC 16CFR 1633)

    Control Unit

    Inflation Time Under 1 minute
    Functions 8 comfort levels; Auto firm; Static mode
    Lateral Rotation
    Low Air Loss; CPR Valve
    Power Requirement 100~120 volt, 60Hz, 5 Amp
    Size 16.5"(L) x 6.7"(W) x 10.6"(H)
    Weight 13.2 lbs
    Max. Air-flow 1200 lpm
    Safety Standard UL/cUL